 Driver Cleaner 1.7
 Cab Cleaner 1.3
 Copyright (c) 2003 Ruud Ketelaars.
 All Rights Reserved.

 It works on all windows operating systems.
 For more info check the help file.
 Also check Cab Cleaner and the help file.
 
 --------------------------------------------
 Support Driver Cleaner
 --------------------------------------------
 If you use Driver Cleaner either for personal or business use and wish to support development so i can continue to improve this product, please donate some money.
 Every little bit helps in my long hours of developing this tool to further aid the community.

 Please use PayPal and use as reciptient's email spike@driverheaven.net

 Or for an easy link see the support section in the help file .


 --------------------------------------------
 First Time Usage for XP/XP SP1
 --------------------------------------------
 ATI:
 1. Unplug nic card or modem from net or disconnect
 2. Remove ATI driver from add/remove programs then remove CP from add/remove programs
 3. Reboot into safe mode (F8 during boot up)
 4. On reboot into safe mode winXP SP1 will auto detect and install drivers. Just let it do its thing. If you can cancel out of the auto install hardware wizard then skip the rest and run Driver Cleaner! If you can NOT cancel out of auto detect wizard then...
 5. Navigate to device mgr->display adapter->uninstall and/or remove ATI display adapter but do not reboot
 6. Run Cab Cleaner (not needed, but recommended)
 7. Run Driver Cleaner
 8. Empty recycle bin and reboot
 9. Install the new drivers and control panel

 nVidia:
 1. Unplug nic card or modem from net or disconnect
 2. Remove nvidia from add/remove programs
 3. Reboot into safe mode (F8 during boot up)
 4. On reboot into safe mode winXP SP1 will auto detect and install drivers. Just let it do its thing. If you can cancel out of the auto install hardware wizard then skip the rest and run Driver Cleaner! If you can NOT cancel out of auto detect wizard then...
 5. Navigate to device mgr->display adapters->highlight nVidia and click uninstall or remove but don't reboot
 6. Run Cab Cleaner (not needed, but recommended)
 7. Run Driver Cleaner
 8. Empty recycle bin and reboot
 9. Install the new drivers


 --------------------------------------------
 First Time Usage for other operating systems
 --------------------------------------------
 ATI:
 1. Unplug nic card or modem from net or disconnect
 2. Remove ATI driver from add/remove programs then remove CP from add/remove programs
 3. Reboot into safe mode (F8 during boot up)
 4. Run Cab Cleaner (not needed, but recommended)
 5. Run Driver Cleaner
 6. Empty recycle bin and reboot
 7. Install the new drivers and control panel

 nVidia:
 1. Unplug nic card or modem from net or disconnect
 2. Remove nvidia from add/remove programs
 3. Reboot into safe mode (F8 during boot up)
 4. Run Cab Cleaner (not needed, but recommended)
 5. Run Driver Cleaner
 6. Empty recycle bin and reboot
 7. Install the new drivers

 --------------------------------------------
 Important on Windows 98
 --------------------------------------------
 ATI:
 After the uninstall of the drivers and control panel check if windows set the display adapter to Standaard PCI Graphics Adapter (VGA).
 If windows set it to Standaard Display Adapter (VGA) than it is highly possible that you wil get an infsetup error when you install the new ATI display driver.
 If you get this error set the display adapter to Standaard PCI Graphics Adapter (VGA) and than install the drivers.

 Cab Cleaner don't need to be used on W9x/ME

 Remember to visit the DriverHeaven website at http://www.driverheaven.net
 for the latest version and information.